Parts included:

1. (1) Main Lever
2. (1) Main Lever Backing Plate
3. (2) Main Lever Phillips Head Screws
4. (1) Teeth Plate
5. (1) Teeth Plate Backing Plate
6. (4) Teeth Plate Phillips Head Screws

Features:

• IPF / APU Approved
• 1/2″ tightness settings
• Interchangeable w/ Non-Pioneer Lever Belts
• Alleviates the use of a Screw Driver
• Teeth Plate Hole Spacing: width: 31mm x height: 25mm

The wait is finally over! The patent-pending Pioneer Adjustable Lever (PAL) is available NOW! The PAL is a modern play on the existing lever and was designed with the “every half inch matters” mindset.

This revolutionary product gives the user the ability to finely tune the tightness (1/2″ settings) to get a perfect fit… ON A LEVER BELT! It also  allows for up to 2″ of adjustments before having to change the tightness of the belts.

So if you wear your belt tight for squats and a bit looser for deads and/or bench, this belt will be perfect! If all that doesn’t sound good enough, you can also just purchase a lever and attach it to an existing lever belt.

It will retrofit most major brands (excluding SBD) as it uses the same hole dimensions as other lever belts already on the market.

The PAL works best with a stiff 10mm and/or any 13mm lever belt.

Loaded Lifting have tested the PAL on the Loaded Lever Belt and our Economy Lever Belts and can confirm they are compatible.

Our Economy Belts do experience some flex while tightening on a stiffer setting but level out correctly once the lever is fully engaged.

Pioneer belts are compatible without modification, however other brands may require modification of their hole size.

Y’all, this project has been in the works for over two years and I am extremely excited for it to come out and help solve some of the problems the existing belts have had.

Patent pending.